Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped functioning one day, it could be due to a dead battery in the coin or water damage or receiver module issues, or a defective electronic chip. Luckily, all of these are easy to fix and you'll be able to get your vehicle back to normal in no time at all!
The key blade can become worn out and result in an issue with your car key. It is easy to fix this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The key fob of your Peugeot 308 may die or become weak enough to not send a powerful signal. This could cause the key fob to stop functioning, preventing you from locking or opening the doors or starting your engine. To fix this issue, you'll need to replace the battery in your key fob.
You'll need a replacement battery from an auto parts store or a local hardware store. When you purchase the battery ensure that it's new and hasn't sat on the shelf for a long time. A fresh new battery will have greater capacity and will also be able to transmit a stronger signal to the car.
After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors aren't unlocking it's likely that the issue lies to be in the receiver module of the car which can be changed by your local Peugeot dealer.
The chip inside the key fob may also be damaged. visit the following internet page could cause damage to your key fob when you drop it on the ground or expose it to moisture. The rubber seals that protect the chip from moisture may become worn down over time particularly if your key fob is exposed to water for extended periods of time like submerging it in the ocean at the beach. To stop this from happening, it's important to keep your key fob away from moisture and not let it come into contact with water.
Water Damage
Don't give up on your key fob when it gets wet, no matter if you slipped into the pool or slipped into a water puddle. While the key fob has rubber seals to protect it from water, prolonged exposure to water may lead to damage to its electronic chip. Water is a great conductor and any water that enters the key fob will cause the short circuits to be in series that eventually destroy the electronic chip. After removing the battery, scrub the contacts with isopropyl alcohol, and dry it off completely before putting it back in.
Your Peugeot 308 may not start due to a dead battery. If you have an extra car, jumper cables could be used to start the engine again. If the battery is the issue, it will need to be replaced.
A malfunctioning receiver in the car may also block it from receiving the signal from the key fob. It could be a problem with the antenna or wiring or the key fob could be damaged. It might be necessary to program a new fob into your vehicle if you are using one. If you cannot solve the issue yourself seek out an expert technician. A technician trained in the field will be able to identify the issue quickly, and resolve it quickly.
Radio Interference
For example, a key fobs that are not recognized or having a narrow range of operation usually mean there is a problem in the system. The interference can be transmitted or radiated, the latter being caused by speaker and power cables passing too close to electrical components. Generally, rerouting the cables or moving them further away from these components can solve the problem.
It's unlikely that someone is watching your key fob signal in the intention of stealing your vehicle, but it's possible that radio interference has drowned out the signal. This is a simple issue to solve.
If you're having issues with your keys that are not recognized, try using an entirely new battery. Make sure the battery is the right size and type. Batteries of the wrong size could damage your battery.
These devices could interfere with the key signal if they are using the same radio frequency. It is best to avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system contains an antenna that receives radio frequency signals from the key fob. If the receiver has developed issues, you will not be able to start your car, even if the key fob works and is reset. The issue could be caused by a number of causes, including the battery of a coin that is dead and water damage. The receiver could also be malfunctioning due to an internal or software issue or damage to the key itself.
The battery inside your Peugeot 308 keyfob has probably died. The battery can be replaced, but you need to ensure that it's the correct battery for your keyfob. It is best to use a battery that is the same size in terms of voltage, size, and specifications as the original.
Another reason that the reason why your Peugeot 308 key fob might not be working is due to the fact that it is linked to a different car. You might have accidentally given the key fob to a friend or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. This tool will request details about your car like its VIN or engine type. It is vital that you enter the correct details.